Environment:

1. 2 CentOS-7.X Servers with minimal installation

2. Docker engine (Install Docker for Kubernetes on CentOS)

Installation Steps:

Note: Follow below steps on every node

Step 1: Disable SELinux

[~]# setenforce 0

[~]# sed -i 's/^SELINUX=enforcing$/SELINUX=permissive/' /etc/selinux/config

Step 2: Make every node accessible to each other with HostName

[~]# vi /etc/hosts

192.168.10.2 k8s-master-1 k8s-master-1.sntechlabs.com

192.168.10.3 k8s-node-1 k8s-node-1.sntechlabs.com

Step 3: Update the nodes with latest pakage available from the OS provider

[~]# yum update -y

Step 4: Add Kubernetes repository

cat <<EOF > /etc/yum.repos.d/kubernetes.repo

[kubernetes]

name=Kubernetes

baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64

enabled=1

gpgcheck=1

repo_gpgcheck=1

gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg

EOF

Step 5: Install kubelet, kubeadm, kubectl packages

[~]# yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes

Step 6: Enable kubelet service daemon

[~]# systemctl enable --now kubelet

OutPut:

Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.

Step 7: Ensure that net.bridge.bridge-nf-call-iptables is set to 1 in sysctl config

[~]# cat <<EOF > /etc/sysctl.d/k8s.conf

net.bridge.bridge-nf-call-ip6tables = 1

net.bridge.bridge-nf-call-iptables = 1

EOF

[~]# sysctl --system

OutPut:

* Applying /usr/lib/sysctl.d/00-system.conf ...

* Applying /usr/lib/sysctl.d/10-default-yama-scope.conf ...

kernel.yama.ptrace_scope = 0

* Applying /usr/lib/sysctl.d/50-default.conf ...

kernel.sysrq = 16

kernel.core_uses_pid = 1

net.ipv4.conf.default.rp_filter = 1

net.ipv4.conf.all.rp_filter = 1

net.ipv4.conf.default.accept_source_route = 0

net.ipv4.conf.all.accept_source_route = 0

net.ipv4.conf.default.promote_secondaries = 1

net.ipv4.conf.all.promote_secondaries = 1

fs.protected_hardlinks = 1

fs.protected_symlinks = 1

* Applying /etc/sysctl.d/99-sysctl.conf ...

* Applying /etc/sysctl.d/k8s.conf ...

* Applying /etc/sysctl.conf ...

[~]# modprobe br_netfilter

[~]# lsmod | grep br_netfilter

OutPut:

br_netfilter 22256 0

bridge 151336 1 br_netfilter

Step 8: Running with swap on is not supported, disable swap

[~]# swapoff -a

Note: Remove swap entry from /etc/fstab

\=======================================

Note: Follow below steps on Master node

Step A1: Initializing Kubernetes control-plane node

[root@k8s-master-1 ~]# kubeadm init --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=192.168.10.2

OutPut:

[init] Using Kubernetes version: v1.15.1

[preflight] Running pre-flight checks

[preflight] Pulling images required for setting up a Kubernetes cluster

[preflight] This might take a minute or two, depending on the speed of your internet connection

[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'

[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"

[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"

[kubelet-start] Activating the kubelet service

[certs] Using certificateDir folder "/etc/kubernetes/pki"

[certs] Generating "front-proxy-ca" certificate and key

[certs] Generating "front-proxy-client" certificate and key

[certs] Generating "etcd/ca" certificate and key

[certs] Generating "etcd/server" certificate and key

[certs] etcd/server serving cert is signed for DNS names [k8s-master-1.sntechlabs.com localhost] and IPs [192.168.10.2 127.0.0.1 ::1]

[certs] Generating "etcd/peer" certificate and key

[certs] etcd/peer serving cert is signed for DNS names [k8s-master-1.sntechlabs.com localhost] and IPs [192.168.10.2 127.0.0.1 ::1]

[certs] Generating "etcd/healthcheck-client" certificate and key

[certs] Generating "apiserver-etcd-client" certificate and key

[certs] Generating "ca" certificate and key

[certs] Generating "apiserver" certificate and key

[certs] apiserver serving cert is signed for DNS names [k8s-master-1.sntechlabs.com kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.10.2]

[certs] Generating "apiserver-kubelet-client" certificate and key

[certs] Generating "sa" key and public key

[kubeconfig] Using kubeconfig folder "/etc/kubernetes"

[kubeconfig] Writing "admin.conf" kubeconfig file

[kubeconfig] Writing "kubelet.conf" kubeconfig file

[kubeconfig] Writing "controller-manager.conf" kubeconfig file

[kubeconfig] Writing "scheduler.conf" kubeconfig file

[control-plane] Using manifest folder "/etc/kubernetes/manifests"

[control-plane] Creating static Pod manifest for "kube-apiserver"

[control-plane] Creating static Pod manifest for "kube-controller-manager"

[control-plane] Creating static Pod manifest for "kube-scheduler"

[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"

[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s

[apiclient] All control plane components are healthy after 21.504093 seconds

[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace

[kubelet] Creating a ConfigMap "kubelet-config-1.15" in namespace kube-system with the configuration for the kubelets in the cluster

[upload-certs] Skipping phase. Please see --upload-certs

[mark-control-plane] Marking the node k8s-master-1.syshunt.com as control-plane by adding the label "node-role.kubernetes.io/master=''"

[mark-control-plane] Marking the node k8s-master-1.syshunt.com as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]

[bootstrap-token] Using token: wu6bhm.dbj2h90ytrconxqw

[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles

[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials

[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token

[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster

[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace

[addons] Applied essential addon: CoreDNS

[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

mkdir -p $HOME/.kube

sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config

sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.

Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:

https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.10.2:6443 --token wu6bhm.dbj2h90ytrconxqw \

--discovery-token-ca-cert-hash sha256:ae3133c45cc556ef151e59a51d68a8012c28ff1958b583a9e860e0decee243

Note: Copy above sha256 token , It will be required for addeding new nodes in clusters

Step A2: To make kubectl work for your user

[root@k8s-master-1 ~]# mkdir -p $HOME/.kube

[root@k8s-master-1 ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config

[root@k8s-master-1 ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config

Step A3: Download pod network add-on ( Ex: Calico ) in cluster

[root@k8s-master-1 ~]# curl -o calico.yaml https://docs.projectcalico.org/v3.8/manifests/calico.yaml

Step A4: Replace the pod IP with same IP which we have used with kubeadm init

[root@k8s-master-1 ~]# sed -i -r "s/192.168.0.0/10.244.0.0/g" calico.yaml

Step A5: Apply pod network add-on in cluster with kubectl

[root@k8s-master-1 ~]# kubectl apply -f calico.yaml

Step A6: Wait for few minutes and check all pods status

[root@k8s-master-1 ~]# kubectl get pods --all-namespaces

OutPut:

NAMESPACE NAME READY STATUS RESTARTS AGE

kube-system calico-kube-controllers-59f54d6bbc-xsw6f 1/1 Running 0 47m

kube-system calico-node-q5gn2 1/1 Running 0 47m

kube-system coredns-5c98db65d4-7llnt 1/1 Running 0 55m

kube-system coredns-5c98db65d4-8vc6j 1/1 Running 0 55m

kube-system etcd-k8s-master-1.syshunt.com 1/1 Running 0 55m

kube-system kube-apiserver-k8s-master-1.syshunt.com 1/1 Running 0 55m

kube-system kube-controller-manager-k8s-master-1.syshunt.com 1/1 Running 0 55m

kube-system kube-proxy-4bkt4 1/1 Running 0 55m

kube-system kube-scheduler-k8s-master-1.syshunt.com 1/1 Running 0 55m

Note: Follow below step on Worker node

Step B1: Add worker node with below command, change the cluster token with the step A1 code

[root@k8s-node-1 ~]# kubeadm join 192.168.10.2:6443 --token wu6bhm.dbj2h90ytrconxqw \

--discovery-token-ca-cert-hash sha256:ae3133c45cc556ef151e59a51d68a8012c28ff1958b583a9e860e0decee243

OutPut:

[preflight] Running pre-flight checks

[preflight] Reading configuration from the cluster...

[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'

[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.15" ConfigMap in the kube-system namespace

[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"

[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"

[kubelet-start] Activating the kubelet service

[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:

* Certificate signing request was sent to apiserver and a response was received.

* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

Note:Follow below step on Master node

Step A7: Get and varify all nodes in cluster

[root@k8s-master-1 ~]# kubectl get nodes

OutPut:

NAME STATUS ROLES AGE VERSION

k8s-master-1.sntechlabs.com Ready master 59m v1.15.1

k8s-node-1.sntechlabs.com Ready <none> 32s v1.15.1